PHYSICAL ARC STUD WELDING TESTING with ceramic ferrule


PHYSICAL ARC STUD WELDING TESTING with ceramic ferrule

BEND TEST: By striking the stud with a hammer, or by sliding a length of pipe or tube over the stud, the stud can be bent a minimum of 30 degree away from its axis, or until failure occurs. Satisfactorily welded studs should exhibit a complete 90 degree bend without failure.

TORQUE TEST : The stud may be torqued with conventional torque testing equipment by applying torque until a predetermined torque or proof load is reached or until failure occurs.

TENSILE TEST : The stud may be tested with conventional tensile testing equipment until a
predetermined load is reached or failure occurs.

OTHER : The stud and weld can be submitted to other conventional forms of destructive or non
-destructive testing as specifications may required.

We can make ceramic ferrule for stud welding according to your drawing.Also our ceramic ferrule has passed above test.(normally with shear connector)

ceramic ferrules for stud welding PHYSICAL ARC STUD WELDING TESTING with ceramic ferrule

Comments are closed.