Skip to content

alumina ceramic lining tile

  • by

Alumina Ceramic Tile is of high wear resistance, acid and alkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material; Wear resistance of ceramic is 266 times than that of special manganese, 171.5 times to high chrome cast iron; Hardness is much higher than that of wear-resistant steel and stainless steel.

Application: Oil, mining, steel and power industry.

Size Available(mm): Length x width x height
10 * 10 * 5/10
17.5 * 17.5 * 4/5/6/7
120 * 80 * 10/12.7/20
110 * 37/34 * 12
130 * 50/47 *12
150 * 60/57 * 12/10
150 * 100 * 50/25.4/12.7/6
100 * 100/50 * 25.4
Hextile: Customized
Trapezoidal Tile: Customized
Heatrotypic Tile: Customized.

Superior wear life in alumina can be attributed to these basic characteristics:

1 Individual alumina grains should be a fine size.

2 Have an even distribution throughout the body.

3 Glass matrix will have no porosity or crystallization.

4 Full adhesion to each alumina grain within the tile.

5 Tile density in relation to AL2O3 content.

6 Matrix components used and mix ratio in combination with firing temperature